User Tools

Site Tools


site:rosston:145.49

This is an old revision of the document!


145.49 Repeater

Methods of control: DTMF. A PDU will likely be purchased for Cabinet 3, but nothing definitive has been decided at this point in time.

Function DTMF Code
Disable Repeater4906110
Enable Repeater4906111
Name Frequency DTMF Code
Unlink500
Control441.225 DCS343501
Simplex446.000502
DCARA 050444.050+ 110.9503
K5RWK UHF444.725+ 110.9504
Simplex446.5505
Flamethrower441.925+ 110.9506
GDB Crossband439.925 DCS043507
UTD Link439.9 DCS043508

Operating Parameters:

  • Callsign: WD5U
  • 145.49MHz
  • -600KHz Offset
  • PL 85.4Hz (TX & RX)
  • 20w transmit power

The Rosston 145.49MHz repeater is a wide-area VHF repeater that covers most of the metroplex and some parts of southern Oklahoma. The National Weather Service office in Fort Worth uses this repeater for spotter reports during severe weather events.

Hardware:

  • Receive Antenna - DB-224 @ 1750' AGL
  • 250' 1/2“ Heliax
  • Telewave preamplifier
  • 4-port splitter
  • Two band-pass cavity filters
  • Kenwood TKR-750 repeater
  • CAT-300 controller
  • Motorola CDM-1250 remote base
  • Transmit Antenna - DB-224 @ 1500' AGL

The 3 remaining ports on the 4-port splitter source 2m RF to the D-Star C module, a voter for the 146.92 Repeater and an RTL-SDR dongle.

The 145.49 Repeater.

A view from the base of the 1750' RX antenna.

Looking down from 1750'. The 53.13 receive antenna can be seen in this shot.

site/rosston/145.49.1515170923.txt.gz · Last modified: 2018/01/05 10:48 by ke5gdb